Start  » Products  » Infrastructure and mobile telephony networks GSM/3G/LTE/WiMAX  » Base Station Antennas  »  Compact Trisector Dualband (DCS/UMTS) Antenna
español English

Envia Antennas

Features

  • Dualband Trisector Antenna : 1710-1880 MHz / 1920-2170 MHz. 
  • Multisector Configutarions: Monosector, bisector 120º, bisector 180º and trisector configuration available.
  • Variable Electrical Tilt, RET. Wide Electrical Tilt range (2º-10º) and ready for RET configuration
  • Double azimut:Global azimuth (+/-50º) and independent azimuth for each sector (+/-10º).
  • Accessibility. The lower compartment allows easy access to connectors and antenna adjusting (azimuth and tilt).
  • Minimum size. Minimum weight and size in the market, thanks to fractal technology. It reduces stress due to wind and structural requirements.

Mast + antenna solution

  • Minimum visual impact. Its small size, together with the mast and add-ons integrated into city scapes, reduces visual impact to the minimum, making it easier to find installation sites.
  • Increased safety. The safety systems included reduce the risk of accidents and the need to work at height. Availability of access for installers only.
  • Cost savings. Folding Mast: Reduces installation time and costs, without expensive work at height. Modular Mast and Base Plate: no crane or civil work costs, resulting in high productivity. It makes it posible to work under adverse weather conditions. Cables channelled inside the mast.

Related Solutions

Product Sheet

Compact Tri-sector dualband (DCS/UMTS) antenna for BTS

The compact tri-sector dualband (DCS/UMTS) TELNET antenna is part of a new generation of antennas for mobile telephone base stations, with radiating components based on fractal geometry. This technology significantly reduces the overall size of the antenna, allowing it to be incorporated under a single cylindrical radome, equivalent to 6 single-band panels in a traditional antenna.

This innovative line of TELNET Compact Antennas has significantly reduced visual impact. It can be assimilated almost imperceptibly into the urban environment by mimicking building elements. In addition, the small height and weight of this family of antennas simplifies installation and maintenance tasks.

 

Mast + Antenna Solution

Each Compact Antenna can be supplied in monosector, bisector or trisector configurations. In addition, each antenna can be supplied in different colours and covers. This family of antennas is ready for RET (Remote Electrical Tilt) technology.

TELNET Compact Antennas are supplied with a modular mast. The masts can reach heights of up to 6 metres and have available a module to house the TMA inside. They are available in different colours and finishes, and three safety options to make installation safer.

Finally, the whole antenna and mast unit is supported by an anchoring mechanism. There are three types available, depending on the needs of each location: floating bedplate, ground pillar mounted and wall mounted.

 

 

 

Technical Specifications

Radio-Electrical

DCS

UMTS

Frequency Range

1710-1880MHz

1920-2170 MHz

Polarization

Xpol,+/- 45º

Xpol,+/- 45º

Gain Max

Gain +/- Avg. Dev

15,6 dBi

15,3 +/- 0,3 dBi

16,2 dBi

15,6 +/- 0,3 dBi

Horizontal Beam width

62 º

60º

Vertical Beam width

11º

10º

Cross Polar Discr. Boresight

Typ 20 dB

Typ 20 dB

F/B Ratio Cop. (180º+/-30º)

> 25 dB

>25 dB

Sidelobe suppression for first sidelobe above horizon

      18         17        15dB

    2º          6º        10º

      18         17        15dB

    2º          6º        10º

Electrical tilt continuously adjustable

2º - 10º   (band and sector independent)

2º - 10º   (band and sector independent)

VSWR

< 1,5:1

< 1,5:1

Intraband Isolation

> 30 dB

> 30 dB

Interband Isolation

> 35 db, typ 45 dB

> 35 dB, typ 45 dB

Nullfill

23 dB

19 dB

Impedance

50 Ohms

50 Ohms

Max. Power per input

300W

300W

PIM  ( 2*20W)

150dBc

150dBc

Azimuth

+/- 10º per sector

+/- 50ª global

+/- 10º per sector

+/- 50ª global

Prepared for RET

OK

OK

 

 

Mechanical

Input

12 x 7/16 female

Connectors position

Bottom, 3 x 4 (7/16)

Dimensions

Diameter: 250 mm

Length: 1650mm

+ 200 mm

Weight

35 Kg.

Max. speed wind

200 Km/h

 

 

 

Material

Radome

Fiber glass +

polyester

End Caps

Stainless Steel

Screws and Nuts

Stainless Steel