Start  » Products  » Infrastructure and mobile telephony networks GSM/3G/LTE/WiMAX  » Base Station Antennas  »  Compact Trisector Quad-band (BB/BB/BB/BB)D635 Antenna
español English

Envia Antennas

 Features

  • Frecuency bands
  • 1710-2170 MHz / 1710-2170 MHz / 1710-2170 MHz / 1710-2170 MHz.
  • Multisector configuration
  • Monosector, bisector 120º, bisector 180º and trisector configuration available.
  • Variable Electrical Tilt, RET
  • · Wide Electrical Tilt range (4-14º).
  • · Ready for RET configuration.
  • Azimuth
  • Global azimuth (+/-50º).
  • Accessibility
  • The lower compartment allows easy access to connectors and antenna adjusting (azimuth and tilt).
  • Minimum size
  • Minimum weight and size in the market, thanks to fractal technology. It reduces stress due to wind and structural requirements .

MAST + ANTENNA SOLUTION

  • Minimum visual impact
  • Its small size, together with the mast and add-ons integrated into city scapes, reduces visual impact to the minimum, making it easier to find installation sites.
  • Increased safety
  • The safety systems included reduce the risk of accidents and the need to work at height. Availability of access for installers only.
  • Cost savings
  • Folding Mast: Reduces installation time and costs, without expensive work at height. Modular Mast and Base Plate: no crane or civil work costs, resulting in high productivity. It makes it posible to work under adverse weather conditions. Cables channelled inside the mast.

Related Solutions

Related Products

Product sheet

Download Product Sheet

Compact Tri-sector Quad-band (BB/BB/BB/BB)D635 antenna for BTS

The TELNET Compact Tri-sector Quad-band (BB/BB/BB/BB)D635 antenna for sharing is part of the ENVIA family, a new generation of antennas for mobile telephone base stations, with radiating components based on fractal geometry. This technology significantly reduces the overall size of the antenna, allowing it to be incorporated under a single cylindrical radome, equivalent to 12 single-band panels in a traditional antenna, wich makes possible the antenna sharing.

This innovative line of TELNET Compact Antennas for sharing has significantly reduced visual impact. It can be assimilated almost imperceptibly into the urban environment by mimicking building elements. In addition, the small height and weight of this family of antennas simplifies installation and maintenance tasks.


MAST + ANTENNA SOLUTION


Each Compact Antenna can be supplied in monosector, bisector or trisector configurations. In addition, each antenna can be supplied in different colours and covers. This family of antennas is ready for RET (Remote Electrical Tilt) technology.

TELNET Compact Antennas are supplied with a modular mast. The masts can reach heights of up to 6 metres and have available a module to house the TMA inside. They are available in different colours and finishes, and three safety options to make installation safer.

Finally, the whole antenna and mast unit is supported by an anchoring mechanism. There are three types available, depending on the needs of each location: floating bedplate, ground pillar mounted and wall mounted.

Especificaciones técnicas

 

Radio-Electrical

x4 Broadband Down

Frequency Range

1710 - 2170 MHz

DCS // UMTS

Polarization

Xpol, +/- 45º

Gain Max

Gain +/- Avg. Dev

17,3 dBi

16,64 ± 0,2 dBi // 16,64 ± 0,3 dBi

Horizontal Beam width

63º // 61º

Vertical Beam width

7º // 6,5º

Cross Polar Discrimination Boresight

>25dB

F/B  Ratio Copolar (180º+/-30º cone)

 27 dB

Side lobe suppression for first side lobe above horizon

           15            17          15     dB

    4º           10º         14º

Electrical tilt continuously adjustable

 4º - 14º
 (sector and band  independent)

VSWR

< 1.5:1

Interport Isolation

> 30 dB

Nullfill

25 dB

Impedance

50 Ohms

Max. Power per input

300W

Inter modulation Products  ( 2*20W)

150dBc

Azimuth

+/-50º :  Full Antenna Azimuth (as a block)

Prepared for RET

OK

&nb

 

 

Mechanical

Input

24 x 7/16 female

Connectors

position

Bottom, 3 x 8 (7/16)

Dimensions

Diameter: 635 mm

Length: 1700mm + 300 mm

Weight

75 Kg.

Max. speed wind

200 Km/h

 

 

 

Material

Radome

Fiber glass +

polyester

End Caps

Stainless Steel

Screws and Nuts

Stainless Steel