Start  » Products  » Infrastructure and mobile telephony networks GSM/3G/LTE/WiMAX  » Base Station Antennas  »  Compact Trisector Singleband (BB) Antenna
español English

Envia Antennas

Features

  • Broadband Trisector Antenna:  1710-2170 MHz. 
  • Multisector Configutarions: Monosector, bisector 120º, bisector 180º and trisector configuration available.
  • Variable Electrical Tilt, RET. Wide Electrical Tilt range (2º-10º) and ready for RET configuration
  • Double azimut:Global azimuth (+/-50º) and independent azimuth for each sector (+/-15º).
  • Accessibility. The lower compartment allows easy access to connectors and antenna adjusting (azimuth and tilt).
  • Minimum size. Minimum weight and size in the market, thanks to fractal technology. It reduces stress due to wind and structural requirements.

Mast + antenna solution

  • Minimum visual impact. Its small size, together with the mast and add-ons integrated into city scapes, reduces visual impact to the minimum, making it easier to find installation sites.
  • Increased safety. The safety systems included reduce the risk of accidents and the need to work at height. Availability of access for installers only.
  • Cost savings. Folding Mast: Reduces installation time and costs, without expensive work at height. Modular Mast and Base Plate: no crane or civil work costs, resulting in high productivity. It makes it posible to work under adverse weather conditions. Cables channelled inside the mast.

Solutions

Product Sheet

Compact Tri-sector Single-band (BB) antenna for BTS

The compact tri-sector Singleband (BB) TELNET antenna is part of a new generation of antennas for mobile telephone base stations, with radiating components based on fractal geometry. This technology significantly reduces the overall size of the antenna, allowing it to be incorporated under a single cylindrical radome, equivalent to 3 single-band panels in a traditional antenna.

This innovative line of TELNET Compact Antennas has significantly reduced visual impact. It can be assimilated almost imperceptibly into the urban environment by mimicking building elements. In addition, the small height and weight of this family of antennas simplifies installation and maintenance tasks.

Mast + Antenna Solution

Each Compact Antenna can be supplied in monosector, bisector or trisector configurations. In addition, each antenna can be supplied in different colours and covers. This family of antennas is ready for RET (Remote Electrical Tilt) technology.

TELNET Compact Antennas are supplied with a modular mast. The masts can reach heights of up to 6 metres and have available a module to house the TMA inside. They are available in different colours and finishes, and three safety options to make installation safer.

Finally, the whole antenna and mast unit is supported by an anchoring mechanism. There are three types available, depending on the needs of each location: floating bedplate, ground pillar mounted and wall mounted.

 

 

Technical Specifications

Radio-Electrical

Broadband

Frequency Range

1710 to 2170 MHz
DCS // UMTS

Polarization

Xpol,+/- 45º

Gain Max

Gain +/- Av. Dev

18,2 dBi

17,3 +/- 0,3 dBi // 17,8 +/-0,3 dBi

Horizontal Beam width

68º // 61º

Vertical Beam width

6.9º// 6.3º

Cross Polar Discrimination
Boresight

 25 dB //  20 dB

F/B  Ratio Copolar
(180º+/-30º cone)

> 25 dB

Side lobe suppression for first side lobe above horizon

      19          19         17   dB

2º           6º         10º

Electrical tilt continuously adjustable

2º - 10º (sector independent)

VSWR

< 1.5:1

Intra band Isolation

> 30 dB

Nullfill

23 dB// 24 dB

Impedance

50 Ohms

Max. Power per input

300W

PIM ( 2*20W)

150dBc

Azimuth

+/- 10º Independent Azimuth per sector

+/- 50º Full Antenna Azimuth 

Prepared for RET

OK

 

 

Mechanical

Input

6 x 7/16 female

Connectors position

Bottom, 3 x 2 (7/16)

Dimensions

Diameter: 250 mm

Length: 1400mm

+ 200mm

Weight

30 Kg.

Max. speed wind

200 Km/h

 

 

 

Material

Radome

Fiber glass + polyester

End Caps

Stainless Steel

Screws and Nuts

Stainless Steel