Start  » Products  » Infrastructure and mobile telephony networks GSM/3G/LTE/WiMAX  » Base Station Antennas  »  Panel Singleband (LTE) Antenna
español English

Envia Antennas

Features

Frecuency bands
· 2300 - 2696 MHz

Variable Electrical Tilt
Wide Electrical Tilt range (4º-14º).

RET
Ready for RET (remote electrical Tilt) configuration.

Accessibility
Easy access to connector, antenna tilt adjusting or RET device at the bottom part.

Minimum size
Minimum weight and size in the market, thanks to fractal technology. It reduces stress due to wind and structural requirements.

Polariazation
Cross-polar: +45º and -45º connectors 7/16 type

Anchoring
Clamps and mechanical downtilt for standard mast are available.

Related Solutions

Related Products

Product Sheet

Panel Singleband (LTE) Antenna for BTS

LTE panel antenna

TELNET panel Singleband (LTE) Antenna is a new generation of antennas for mobile phone base stations, whose radiating elements are based on fractal geometry. This technology significantly reduces the size and volume of the antenna.

The innovative line of panel antennas of TELNET significantly reduces the visual impact as it is possible mimic the antenna, facilitating their integration into the environment through the simulation of building elements, maintaining the versatility of azimuthal and zenithal adjustments (tilt). In addition, the low size of this family of antennas simplifies the installation and maintenance work. This family of antennas is ready for the addition of a Compact RET (Remote Electrical Tilt).

TELNET panel antenna can be mounted on a traditional mast by anchors and mechanical tilt or aesthetically integrated with the modular square mast.

 

Technical Specifications

Radio-Electrical

LTE

Frequency Range

2300 - 2696 MHz

Polarization

Xpol, +/- 45º

Gain Max

Gain +/- Av. Dev

18,2 dBi

17,1 ± 0,3 dBi

Horizontal Beam width

65,2º

Vertical Beam width

7º// 6,5º

Cross Polar Discrimination Boresight

Typ 22 dB

F/B  Ratio Copolar

(180º+/-30º cone)

> 25 dB

Side lobe suppression for first side lobe above horizon

        20            20          18   dB

    4º           10º         14º

Electrical tilt continuously adjustable

4º - 14º (sector independent)

VSWR

< 1.5:1

Intra band Isolation

> 30 dB

Null fill

25 db

Impedance

50 Ohms

Max. Power per input

300W

Inter modulation Products  ( 2*20W)

150dBc

Prepared for RET

OK

 

 

Mechanical

Input

2 x 7/16 female

Connectors position

Bottom,  2 (7/16)

Dimensions (HxWxD)

1100 mm x 150mm x 100mm

Weight

6,5 Kg.

Max. speed wind

200 Km/h

 

 

 

Material

Radome

Fiber glass + polyester

End Caps

Plastic of high resistance for the exterior

Screws and Nuts

Stainless Steel