Features
· Media Converter for broadband services over MPLS/IP networks
Media converter card capable of extending through optical fiber a Gigabit Ethernet connection. Different applications depending on SFP module inserted.
· Network Termination
CM-1000-IB acts as a network termination point and service demarcation point between the operator's access network and the customer.
· In-Band management
The CM-1000-IB media converters implement a in-band management procedure that does not lessen the bandwidth of the customer's traffic.
· Modular SFP Transceivers
SFP optical interface modules with connectorization LC/PC.
· Level 2 measures
They allow full level 2 measures of the link (packet loss, throughput, jitter, latency) to help to detect the origin of the shortcomings of the service in case of failure.
Product Sheet
CM-1000-IB
The CM-1000-IB media converters allow, by a couple of cards, extending the access optical span from the switch/router of the client to the aggregation node of the central. The card performs electro-optical conversion of the signal and acts as a network termination point between the customer and the operator, allowing the definition of responsibility for problems or failures of the link. CM-1000-IB cards are used for the deployment of broadband services over MPLS/IP: supporting monitoring of quality of service parameters in L2: packet loss , measures of jitter and frame latency.
In-Band Management
These converters are installed in pairs configured as master/slave. The in-band management of the link is made from the master card in the central.
The particular design of these cards allows management traffic not to decrease the bandwidth of the customer traffic, ensuring at anytime 100% of the GbE link capacity.
The management of CM-1000-IB is compatible with SNMP IIc standard content in the RFCs 2578/2863/1231/2579. Each unit is supplied with its corresponding MIB to be compiled by the main SNMP managers.
The cards implement complete management features, including SNMP traps.