Antena trisector tetrabanda 4x 1710-2690 MHz TNA700A00Rx0y

Antena trisector tetrabanda 4x 1710-2690 MHz

Antena compacta
Diámetro 635 mm
RET interno

Especificaciones eléctricas RF*

Frequency Range (MHz)		1710-1880 1920-2170 2500-2690
Cluster Name		Y1//Y4			Y2//Y3
Gain (dBi)	Min Tilt	16,0	16,4	17,5	16,4	17,1	18,0
	Mid Tilt	16.6	17.1	18.2	16.5	17.2	17.7
	Max Tilt	16.4	16.8	17.9	16.4	17.1	17.1
	Over all Tilts
	Average	16.5	17.0	18.1	16.5	17.2	17.7
	Tolerance	0.5	0.6	0.6	0.5	0.6	0.6
Azimuth Beamwidth (deg)	Average	73	70	63	69	64	61
	Tolerance	6	4	3	7	5	6
Elevation Beamwidth (deg)	Average	7.2	6.5	5.1	7.1	6.4	5.1
	Tolerance	0.5	0.6	0.4	0.5	0.6	0.4
Elevation Downtilt Deviation (deg)		<0,5	<0,4	<0,5	<0,5	<0,3	<0,5
First Upper Sidelobe level		>17	>19	>17	>16	>17	>15
Upper Sidelobe Level peak to 20º above (dB)		>17	>19	>16	>16	>18	>15
Cross Polar Discrimination at Boresight (dB)		>24	>24	>18	>22	>22	>21
Cross Polar Discrimination Over Sector (dB)		>8	>8	>2	>12	>12	>7
Front to Back Ratio total power ±30º (dB)		>24	>25	>23	>26	>28	>23
Cross Polar Isolation (dB)		>27	>27	>27	>27	>27	>27
Interband isolation (dB)		>27
Polarization (deg)		±45
Electrical Downtilt (deg)		2—12
Impedance (Ω)		50
VSWR		< 1.5:1
PIM, 2x43dBm (dBc)		< -153
Max. Effective Power per Port (W)		300

Especificaciones mecánicas

Antenna Dimensions: Height/Diameter (mm)	1500 + 300 x 635
Packing Size: Height/Width/Depth (mm)	1895 x 751 x 757
Net Weight (kg)	115
Shipping Weight (kg)	128
Connector Quantity	24 (3×8)
Connector Type	7/16 or 4.3-10 female connectors
Connector Position	Bottom
Wind Load Frontal (N @ 150 KMH)	981
Wind Load Lateral (N @ 150 KMH)	981
Wind Load Rear (N @ 150 KMH)	981
Survival wind speed (km/h)	200
Azimuth (Full antenna / Per Sector)	± 50º / ± 0º
Radome Material	Fiber glass + polyester
Radome Colour	RAL9018
Mechanical Distance between Mounting Points – Antenna	N/A
Mechanical Distance between Mounting Points – Pole	N/A
Lightning Protection	DC grounded

TELNET RET

RET type	Internal
Actuator standalone size: Height / Width / Depth (mm)	Inside the antenna
Actuator installed size: Height / Width / Depth (mm)	Inside the antenna
Working temperature range (ºC)	-33—70
Power consumption (W)	1—10
Loss of position on power failure	False
Compatible standards	3GPP/AISG 2.0
Configuration management	Integrated RET, pre-configured.
Antenna configuration file availability	True
Antenna configuration file upgradability	Yes, by base station and proprietary portable controller
Software upgradability	Yes, by portable controller only
Replaceability in field	Yes, without removing antenna
Visual indicator available on tilt change	True
Daisy chain available	True

Ordering codes

Rx
RU: Antenna with INTERNAL RET in all bands + one AISG control interface RI: Antenna with INTERNAL RET in all bands + two AISG control interfaces RP: Antenna ready for INTERNAL RET installation in all bands and one ore two AISG control interfaces. Motors and electronics can be installed afterwards (without uninstalling antenna)
0y
00: Antenna with 7/16 connectors 01: Antenna with 4.3-1 connectors

* By default, all antennas are supplied with trisector configuration and white colour (RAL9018). For different colours and sector
configurations, contact us.

Cabling

Cabling for daisy chain connexion between sectors

Telnet cable code	TNR215xxx (where xxx is the length of the cable)
Connector 1	IEC 60130-9, female connector
Connector 2	IEC 60130-9, male connector
Length	500mm

Cabling between RETs and BTS/RRU

Telnet cable code	TNR215xxx (where xxx is the length of the cable)
Connector 1	IEC 60130-9, female connector
Connector 2	IEC 60130-9, male connector
Length	From 1m to 150m